硬盘验证器 v1.1.2 汉化版

硬盘验证器是一款便携式的实用程序,用于测试识别硬盘驱动器的坏扇区。此工具提供有关坏扇区的详细信息,以便您可以尝试修复它们。您的硬盘驱动器是以块为单位(扇区)写入数据,在每次硬盘驱动器更新扇区时,它还将在更新扇区数据后立即存储校验和。当从硬盘驱动器读取扇区时,扇区校验和应与扇区数据匹配。如果校验和不匹配,硬盘会在写入操作期间识别为出现问题 – 该事件称为坏扇区。在写入操作或硬盘驱动器故障期间,出现坏扇区的原因有很多,如电源故障等。

硬盘验证器为您提供了一种查看是否存在坏扇区的方法,因此您可以通过覆盖它来清除所谓的坏扇区。

如果出现了因为电源故障导致的坏扇区,则“读取 + 擦除损坏 + 读取”测试将是清除坏扇区的最快方法。

如果因为驱动器出现问题导致的坏扇区,则应在备份数据后选择“写入 + 验证”测试。注意,此测试将清除磁盘上的所有数据,请慎重使用。

所有测试都会形成日志,您可复制后供日后使用。

硬盘验证器提供以下四种可供选择的测试:

– 读取:将扫描整个硬盘驱动器表面以查找坏扇区。

– 读取 + 擦除损坏 + 读取:将扫描整个硬盘驱动器表面以查找坏扇区,如果发现坏扇区,将覆盖它们,并再次读取以确保写入成功。

– 读取 + 写入 + 验证 + 恢复:程序将向磁盘写入测试模式,验证模式是否已成功写入,然后还原原始数据。

– 写入 + 验证:程序将向磁盘写入测试模式并验证模式是否已成功写入(慎用,原始数据将会丢失)。

版本更新:官方不提供此程序的更新日志。

此程序由 th_sjy 汉化分享

v1.1.2 汉化版下载:城通:https://545c.com/f/235978-500314229-a0164f    (访问密码:336307)

v1.0.9 汉化版下载:https://545c.com/file/235978-405052968

 


Hard disk verifier is a portable utility for testing and identifying bad sectors of hard disk drives. This tool provides detailed information about bad sectors so that you can try to fix them. Your hard disk drive writes data in blocks (sectors). Every time the hard disk drive updates a sector, it will also store the checksums immediately after the sector data is updated. When a sector is read from a hard disk drive, the sector check sum should match the sector data. If the checksums do not match, the hard disk is identified as having a problem during a write operation - this event is called a bad sector. During write operation or hard drive failure, there are many reasons for bad sectors, such as power failure.

The hard disk verifier provides you with a way to see if there are bad sectors, so you can clear the so-called bad sectors by covering it.

If there is a bad sector caused by power failure, the "read + erase damage + read" test will be the fastest way to clear the bad sector.

If there is a bad sector caused by a problem with the drive, you should select the "write + verify" test after backing up the data. Note that this test will clear all data on the disk, please use it carefully.

All tests are logged and you can copy them for later use.

The hard disk verifier provides the following four test options:

– read: scans the entire hard drive surface for bad sectors.

- read + erase damage + read: the entire hard drive surface will be scanned for bad sectors. If bad sectors are found, they will be covered and read again to ensure successful writing.

- read + Write + verify + recover: the program will write the test mode to the disk, verify whether the mode has been successfully written, and then restore the original data.

- write + verify: the program will write the test mode to the disk and verify whether the mode has been successfully written (use with caution, the original data will be lost).

Version update: the official does not provide the update log of this program.

This program is run by th_ Sjy Chinese sharing

V1.1.2 Chinese version download: Chengtong: https://545c.com/f/235978-500314229-a0164f     ( Access code: 336307)

V1.0.9 Chinese version download: https://545c.com/file/235978-405052968

 

Related Post

Leave a Reply

Your email address will not be published. Required fields are marked *